- On sale!
Snappy Teak-Nu two-part teak cleaner and restorer Formula 2, 1Litre
£19.99
VAT included
Returns policy
T & Cs
- Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 to achieve best results.
- FOR BADLY SOILED, OILED OR COATED TEAK:1. Wear protective gloves. Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck. Use a medium bristle brush to spread evenly across the area to be treated. When the treated area darkens to a uniform dark brown, use a coarse bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes after use.
- 2. Next, use a bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over the treated area, then use a coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water. When the treated area is completely dry, the deck will look like it has been freshly sanded.
- FOR LIGHTLY SOILED TEAK:1. Wear protective gloves. Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution. Use a medium or soft bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use a medium or soft bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse the brush thoroughly after use.
- 2. Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use medium to soft bristle brush to spread uniformly over the treated area. Use medium to a soft bristle brush, scrubbing lightly to attain a uniform light colour. Rinse treated area thoroughly.
- When the treated area is completely dry, the deck will look like it has been freshly sanded.
- HELPFUL SUGGESTIONS
- Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminium, fibreglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.
- To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paintbrush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.
- Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolourations without bleaching the wood.
6 Items
other products
11 other products in the same category:
