VIMAR Eikon Evo 21512.1 3M Full Flat grey color touch screen

R21512.1

Eikon EVO

3M Full Flat gray color touchscreen

Full Flat color touch screen replacement for home automation control and command, 1 input for a temperature sensor, to be completed with Eikon, Arké or Plana cover plates, gray - 3 modules

Device with a touch screen to be used in the By-me automation system for 

controlling lights, roller shutters, air-conditioning, scenarios and speaker system. 

In addition, if the system is also fitted with the load control, the device enables 

viewing the state of the loads themselves. The device also, allows the connection 

of an external temperature sensor (Art. 20432-19432-14432-02965.1). It does not 

handle the intrusion detection system.

The touch screen can be installed either horizontally or vertically.

It is recommended to install the device at a height of 150 cm from the floor.

CHARACTERISTICS.

• Nominal supply voltage: BUS 29 V

• Absorption: 42 mA

• Terminals: 

- TP bus

- Input for temperature sensor

• Possible functions:

- ON/OFF switch (switching lights on/off), roller shutter control and dimmer control 

(adjusting lights)

- scenario activation

- aircon control

- speaker system control

- viewing load absorption (load control)

- up to 5 pages (screens) that can be configured for controlling a room

• The touch screen should be installed only in a SELV environment

• Consist with:

- By-me 3-module flush control units, rel. 1.0 and next

- thermostats, rel. xxxxxxxxx5.0 and next

- EasyTool Professional rel. 1.6 and nex